Call us at 732 292-1994 or 800 867-6690 | Email us at triadscientific@gmail.com | Visite us on
PLANET BEST
Lab Instrumentation
Lab Equipment
Lab Furniture
Forced air oven
Maximum temperature TC 40, 100 = 200°C
Maximum temperature TC 160, 240, 400 = 275°C
Microprocessor PID controller Fuzzy-Logic LCD display Keypad Timer up to 0-999h59m Real-Time Clock Programming: 50 Programs with 15 steps (Temperature, Gradient, Time, Fan Speed)
S 232 Interface 1 or 2 shelves
The special characteristic of this multi-functional drying and heating cabinet is found in its unique and patented system named «All in door». This Swiss development provides the TC 40 and the TC 100 with some important advantages in comparison with units of conventional design. Maximum temperature +200°C.
The «All in door» system is responsible for making the TC 40 and the TC 100 one of the most compact units in their volume class. First and foremost, the system guarantees full versatility in terms of chamber equipment. Lead troughs are feasible almost anywhere.
SalvisLab Thermocenter is setting standards in quality as well as in design. The units are manufactured in renowned Swiss quality according to International standards and excel through precision, reliability and design.
The TC 40 as well as the TC 100 is ideally suited for applications in research and industry.
All technical components (heater, ventilator and controller) are located inside the door. The door is fastened to the housing by four screws and may easily be removed. Thus, maintenance becomes extremely easy and maintenance cost becomes negligible.
Special insulation technology applied with the TC 40 and TC 100 keeps heat where it belongs, namely in the chamber. The door seal guarantees excellent tightness transition from housing to front door. Low energy consumption is guaranteed.
SalvisLab Thermocenter is a well-rounded system. All transitional points between walls, ceiling and chamber bottom are deep-drawn, thus promoting easy cleaning.
You determine the desired temperature and the SalvisLab Thermocenter keeps it with great precision in every corner of the payload area and over the entire predetermined cycle time.
A safety controller monitors the function of the main controller and prevents temperature overrun of preset values. In addition, a mechanical maximum temperature safety device will cut off the entire unit in case of need.
Unmanned operation of the units is permitted on the basis of this dual layer safety system.
The door seal of the SalvisLab Thermocenter is easy to clean and provides absolute tightness. It prevents heat loss as it also keeps vapours and gases from escaping.
SalvisLab Thermocenter is at home anywhere in the world. All our units are fluent in five major languages.
The standard bi-directional RS 232 interface enables connection of exterior equipment for programming and evaluation.
50 programs at 15 program steps each (set temperature, gradient, hold time, fan speed) can be stored with a Maximum program duration of 999 hours 59 minutes. The integrated Real-Time-Clock simplifies programming. All programs remain stored in case of power failure.
The EasyMenu developed by SalvisLab enables intuitive programming of the SalvisLab Thermocenter. In just a few easy steps, temperature, gradients, hold time and fan speed can be determined. The LCD display keeps you informed with all the desirable data over the entire process cycle.
The large type SalvisLab Thermocenter feature air turbines and heater elements located in the back of the housing. Air exchange is accomplished by means of the IntelliFan control.
Also the large type SalvisLab Thermocenter is dependable and precise in their temperature distribution characteristics even to the last corner and up to +275°C. (Working range +5°C oRt up to +275°C)
The PT100 temperature probe guarantees precise temperature characteristics exactly as required by the programmed defaults.
The units are provided with a lead-through (dia. 6 mm) for installation of additional temperature probes or electric cables. 20 and 40 mm lead-through are available on request.
The unimpeded versatility in terms of loading options of the chamber opens new horizons of applications for research and industry. SalvisLab Thermocenter are proved and tested in applications for drying of solid substances e.g. for aging tests, in conventional as well as in high tech applications.
Standard equipment consists of two grid shelves. They are designed for high payload and enable an unimpeded airflow.
The Thermocenter as well as the grid shelves are made of high quality stainless steel.
