<< Back to main page

ECHOTHERMâ„¢ CO50 PROGRAMMABLE COLUMN CHILLER/HEATER

HPLC COLUMN CHILLER/HEATERS >> ECHOTHERMâ„¢ CO50 PROGRAMMABLE COLUMN CHILLER/HEATER

Features:

Full programmability. Stores 5 programs of up to 10 steps each in memory for instant recall and use. Each program can be made to repeat automatically from 1 to 99 times
Temperature range from 4.0°C to 100.0°C. Can control at or near room temperature regardless of changes in room temperature
Readable and settable to 0.1°C
Accuracy to ±0.2°C
Built-in stable temperature light which illuminates when set temperature is reached and is stable
User settable, built-in column injection counter. Counts to 1000 injections
Chamber size 15- (38.1 cm) long, 1.5- (3.8 cm) wide and 1.5- (3.8 cm) deep. Has clamps that hold 1/4- diameter or â- diameter columns up to 30 cm long with room for fittings
Chamber milled from one piece of aluminum. The floor is sloped to the right where a ¼- OD tube exits the chamber for collecting any spills
Easy top cover access to columns and fittings
Energy efficient Peltier chilling and heating. No CFCs or other refrigerants
PID temperature control of chamber using accurate platinum RTD temperature sensor
30-day count down timer with alarm and user settable Auto-Off that turns the heater/chiller off after the timer counts to zero
RS232 I/O port for control by computer or chromatograph or for data collection
Electronic calibration held in memory without the need for batteries
12-month warranty
UL, CSA and CE compliant

Product Description:

The CO50 Chilling/Heating HPLC Column Oven offers the reliability of a completely solid-state system. The only moving parts in the unit are the cooling fans, while its Peltier-based design removes the need for compressors or CFCs. The energy efficient CO50 uses a maximum of 120 watts of power-less than many light bulbs.

The CO50 chamber is insulated with chemically resistant silicon rubber. The case construction is ABS plastic and sheet steel painted with chemically resistant epoxy paint. The cover is machined from block polycarbonate to resist heat and chemicals.

Product Specification:

Temperature:
Range	4.0°C to 100.0°C
Readability	0.1°C
Accuracy	±0.2°C
Stability	±0.2°C
Sensor Type	Platinum RTD
Controller Type	PID
Uniformity	±0.5°C

Timer:
Range	30 days
Readability	1 second
Audible Alarm	Yes
Auto-Off	Yes

Electrical:
Heater/Chiller	Peltier, 100 watts
On/Off Switched	Yes
Electrical	Universal Bench Top power supply. Take AC inputs from 100 VAC to 260 VAC, 50/60 H2 and converts that to 12 VDC for the unit.

Chamber Dimensions:
Length	15.0- (38.1 cm)
Width	1.5- (3.8 cm)
Depth	1.5- (3.8 cm)

Overall Chassis:
Height	6.25- (15.9 cm)
Width	7.90- (20.1 cm)
Length	16.75- (42.5 cm)
Weight unpacked	14.5 lbs (6.6 kg)

Other items in same category

ECHOTHERM CO20

ECHOTHERMâ„¢ CO30 HIGH CAPACITY COLUMN CHILLER/HEATER

ECHOTHERMâ„¢ CO50 PROGRAMMABLE COLUMN CHILLER/HEATER