<< Back to main page

Dri-Block Inserts

Dri-Blocks >> Dri-Block Inserts

For use with Techne® block heaters. Manufactured from anodised aluminium and all with a separate hole to accommodate a thermometer if desired. All blocks have dimensions (d x w x h) of 95 x 76 x 51 mm and can be used in any combination (except 96-well blocks).

Technical and Ordering Information

Product Code	Tube Size (diameter)	Number of Holes	Size d x w x h (mm)
F3501	Plain Block	None	95 x 76 x 51
F3502	6mm	30	95 x 76 x 51
F3503	10mm	20	95 x 76 x 51
F3504	12mm	20	95 x 76 x 51
F3505	13mm	20	95 x 76 x 51
F3506	15mm	12	95 x 76 x 51
F3507	16mm	12	95 x 76 x 51
F3508	19mm	8	95 x 76 x 51
F3509	25mm	6	95 x 76 x 51
F3510	10mm cuvettes	2 channels	95 x 76 x 51
F3512	Plain block	Thermometer hole only	95 x 225 x 51
F4460	Plain block	Thermometer hole only	95 x 76 x 51
F4461	7 and 9 mm	20 and 10	95 x 76 x 51
F4462	24mm	6	95 x 76 x 51
F4463	26mm	6	95 x 76 x 51
F4464	1.5ml microcentrifuge tubes	20	95 x 76 x 51
F4465	0.5ml microtubes	30	95 x 76 x 51
F4466	Plastic spacer	None	95 x 37 x 51
F4467	Hi-Temp 96 block	96	95 x 151 x 61
F4468	Falcon round bottom plate block	96	95 x 151 x 61
F4469	Falcon flat bottom plate block	96	95 x 151 x 61
F4470	2.0ml microcentrifuge tubes	20	95 x 76 x 51
F4471	0.2ml microtubes	72	95 x 76 x 51
F4473	Block for 96 x 0.2ml microtubes	96	95 x 151 x 61
F4474	1.0ml Porvair Plate	96	95 x 151 x 48
F4476	Block for Gelation timer	1 sample cup	95 x 76 x 51

Other items in same category

DBSoft PC Software

Dri-Block Inserts

Dri-Blocks 2 position

Dri-Blocks 3 position

Dri-Blocks 4 position

Dri-Blocks Twin Control