<< Back to main page

ECHOTHERM™ IC30 HEAVY-DUTY DIGITAL CHILLING/HEATING DRY BATH

CHILLING AND HEATING DRY BATHS >> ECHOTHERM™ IC30 HEAVY-DUTY DIGITAL CHILLING/HEATING DRY BATH

Optional Model:

XT Model (chilling range expanded to -20°C without sample block)

Features:

Energy-efficient Peltier design
Digital control to 1°C from -10 to 100°C without sample block
Control at ambient
Count down timer (up to 30 days) with alarm and user settable Auto-Off
RS232 I/O port for control and data collection
Built-in data logger
Electronic calibration. User can reset to any local standard
Compact size uses very little bench space
UL, CSA and CE compliant
12-month warranty

Applications Include:

Maintaining 14°C for ligation reactions
Maintaining 17°C for storing oocytes
Store samples at ice bucket temperatures
Incubating samples in 96-well assay plates, or in aluminum blocks holding 0.2, 0.5 or 1.5 ml centrifuge tubes
Storing enzymes or DNA libraries at your work station
Enzyme reactions and deactivations
Freezing and storing most any small sample at your workstation
Working directly on plate surface

Product Description:

The completely solid-state EchoThermâ¢ IC30 Large, Heavy-Duty, Digital, Electronic Chilling/Heating Dry Bath is versatile, reliable and easy to use. The IC30 has simple digital controls and a two line alphanumeric digital display that is backlit for easy reading.

The chilling/heating surface is a 5- (12.7 cm) square aluminum plate that is very flat for optimal contact with your sample. When unloaded, the plate surface will reach below 0°C in under two minutes. It will also heat to 37°C in approximately 3 minutes. This rate of chilling or heating may vary with the load on the plate. For instance, temperatures down to 4.0°C can be reached on a solid aluminum block in less than one hour. When insulated, these large blocks can be driven below 0°C. Temperature gradients from the center to the edge of any aluminum block mentioned will be less than 0.5°C at any temperature.

Sample covers are available for covering aluminum blocks.

Product Specification:

Temperature:
Range	-10°C to 100°C w/o sample block
Readability	1°C
Accuracy	±1°C
Stability	±1°C
Sensor Type	Platinum RTD
Controller Type	PID
Uniformity	±0.5°C

Timer:
Range	00:01 to 30 days
Readability	1 second
Audible Alarm	Yes, alarm sounds for 1 minute. Timer counts up until turned off.
Auto-Off	Yes, user settable.

Data Logger:
Sample times	1 sec, 1 min or 5 minutes per data point
Capability	8110 data points

Electrical:
Heater/Chiller	Peltier, 100 watts
Operating Voltages	100-265 VAC, 50/60Hz
Power Consumption	100 watts maximum
Power Switch	Yes

Dimensions:
Chilling/Heating Module
Width	8.5- (21.6 cm)
Depth	10- (25.4 cm)
Height	4- (10.2 cm)
Weight	8 lbs (3.64 kg)

Other items in same category

14407

14408

14410

14411

14412

14413

ECHOTHERM™ IC30 HEAVY-DUTY DIGITAL CHILLING/HEATING DRY BATH

ECHOTHERM™ RIC20 SERIES REMOTE CONTROLLED CHILLING/HEATING DRY BATHS

EchoTherm™ SC20 Orbital Mixing Chilling/Heating Dry Bath: